Metal Roofing Consultants - Robert Stanford & Associates, Inc.

Third Party Metal Roofing Consultant Specs By Robert Stanford Section 07400-Preformed Metal Roofing Architectural Construction Project Specifications
A. Metal Roofing Consultant
	1.	Metal Roofing Consultant shall be a person with a minimum of 15 years' experience in the installation of metal roofing systems, and shall be certified as an installer by metal roofing manufacturers. Such certification(s) shall be current and shall demonstrate that the Consultant is up to date on installation procedures and instructions as set forth and established by metal roofing manufacturers, contract documents, and any other control documents, as referenced in the specifications. Printed copies of Certificates of Competency and qualifications shall be provided, as requested, to the architect, building owner, general contractor, installation contractor, surety or construction bonding company, or others holding a financial interest in the project.
	2.	Metal Roofing Consultant shall be certified and approved as a qualified Third Party Metal Roof Consultant by the metal roof manufacturer, and shall be recognized by industry peers as qualified to provide consultant services, and shall provide references as required.
	3.	Metal Roofing Consultant shall be a member in good standing with Roof Consultants Institute (RCI) and shall be certified as an RRO or RRC.
	4.	Metal Roofing Consultant shall provide a copy of his/her experience and qualifications, along with written Fee Schedule outlining services to be performed.
	5.	Metal Roofing Consultant shall provide services of observations, inspections, written and photographic reports, meeting attendance, review of contract documents, drawings, specifications, recommendations, and other such services as may be requested by the architect, owner, metal roofing manufacturer, general contractor, or other persons or corporations that have engaged the services of the Consultant.
	6.	Upon request, Metal Roofing Consultant shall provide a written outline setting forth the services to be provided for the project entitled: "Metal Roof Consulting Assignment/Scope of Service." This Scope of Service shall be performed as a lump sum fee, hourly rate fee or contract allowance, or on terms, conditions, and schedule acceptable to the architect, owner, metal roofing manufacturer, general contractor, or other persons, corporations or entities engaging the services of the consultant.